A one component silicate-based inorganic polymer coating. Wall finishing coat for either flat and / or texture coatings for both interior and exterior use.

Characteristics:
- Its micron granular binder creates an inorganic Polymer composite resulting in a high degree of hardness and durability
- Its ultrafine particles in silica will suspend in water and as the water or moisture evaporates, It will adhere to each other hence forming a high density film
- Good water and alkaline resistance
- Highly resistance to Fungus and algae
- Perfectly non-combustible and inflammable due to its inorganic polymer composition
- Easy application

Surface Preparation:
Surface shall be dry and free from dirt, dust, oil, grease and foreign matter. Surface unevenness, cracks, etc. shall be made good with our cementitious filler.

Application Data:
No. of Component: One
No. of Coat: Two

Coverage:
0.15 - 0.20 kg/m2/Coat
0.30 - 0.40 kg/m2/2 Coats

Dilution :
0 - 10 % by weight with water

Overcoating Interval: 2 hours
Method of Application: By Roll, Brush or Spray

Packing Style:
25 kg/can